• 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 公司新闻
  • 您现在的位置:首页 > 新闻资讯 > 公司新闻 >
  • 无菌室的技术指标要求!
    来源:http://www.jnyhrs.com 浏览: 发布日期:2019-07-26
      无菌室技术指标,冬季温度:> 16℃±2℃;夏季< 26℃±2℃。相对湿度:40-60% (RH)噪声:≤45db (A)粉尘数:0./U≤3.5 /L。室内静压:≥1.5mm水柱。新风补充:供气总量的10%-30%,照明:300勒克斯。换气:100000级≥15次;10000级≥20次;等级1000≥30次。压差:相邻房间主车间≥5Pa,非洁净区域洁净室≥10Pa。
      Technical index of aseptic chamber, winter temperature: > 16 +2; summer < 26 +2. Relative humidity: 40-60% (RH) noise: < 45dB (A) dust number: 0. / U < 3.5/L. Indoor static pressure: > 1.5mm water column. Fresh air supplement: 10% to 30% of the total air supply, lighting: 300 lux. Ventilation: 100000 grade (> 15 times); 10000 grade (> 20 times); 1000 grade (> 30 times). Pressure difference: the main workshop of adjacent rooms is 5Pa, and the clean room of non-clean areas is 10Pa.
      无菌室送风口采用不锈钢框架,美观干净,穿孔网板采用烤漆铝板,无锈蚀和灰尘,清洁。公司生产其他净化设备,洁净台:立式洁净台、卧式超洁净台、医用超洁净台、生物医用台、不锈钢净化台、生物安全柜;转移窗:淋浴转移窗、不锈钢转移窗、电子联锁转移窗、生物转移窗,除静态转移窗、地板转移窗、滚筒转移窗、标准转移窗外。自净机、自动烘手机、采样车、新风柜、层流罩、层流送风单元(FFU)、送风口、洁净棚(净化工棚)等。
      The air supply port of aseptic room is made of stainless steel frame, which is beautiful and clean. The perforated mesh board is made of baked aluminium plate, which is free of rust and dust and clean. The company produces other purification equipment, clean desk: vertical clean desk, horizontal ultra-clean desk, medical ultra-clean desk, biomedical desk, stainless steel purification desk, biological safety cabinet; transfer window: shower transfer window, stainless steel transfer window, electronic interlocking transfer window, biological transfer window, except static transfer window, floor transfer window, drum rotation. Move window, standard transfer window. Self-cleaning machine, automatic drying cell phone, sampling car, fresh air cabinet, laminar hood, laminar air supply unit (FFU), air supply outlet, clean shed (purification shed), etc.
    无菌室装修
      无菌室工程特点,净化厂房墙面,顶板一般采用50mm厚夹芯彩钢板制造,具有美观、刚性强等特点。圆弧角、门框、窗框等一般采用特殊的氧化铝型材制造。地板采用环氧自流平或进口耐磨PVC地板,如有需要可作抗静电型。通风管道采用镀锌钢板加阻燃PEF泡沫塑料板制成,具有良好的净化保温效果。进风口采用不锈钢框架,美观干净,冲孔网板采用铝板烘干漆,无锈蚀、无粘尘,应保持清洁。先进的设计理念,优化设备与设施的组合,为医护人员创造良好的条件。传统手术室术后感染率达30%,而洁净手术室术后感染率低于0.5%。
      Sterile room engineering features, purifying factory wall, roof is generally made of 50mm thick sandwich color steel plate, with beautiful, rigid and other characteristics. Arc angle, door frame, window frame and so on are generally made of special alumina profiles. The floor adopts epoxy self-leveling or imported wear-resistant PVC floor, which can be used as antistatic type if necessary. The ventilation pipe is made of galvanized steel plate and flame retardant PEF foam plastic plate, which has good purification and thermal insulation effect. The air intake adopts stainless steel frame, which is beautiful and clean. The perforated mesh plate adopts aluminium plate drying paint. It is rustless and non-sticky, so it should be kept clean. Advanced design concept, optimize the combination of equipment and facilities, create good conditions for medical staff. The infection rate of traditional operating room was 30%, while that of clean operating room was less than 0.5%.
      关于无菌室技术指标就给大家讲解到这里,今后您有无菌室装修等方面的需求可以点击官网进行咨询:http://www.jnyhrs.com
      The technical indicators of aseptic room are explained here. In the future, you can click on the official website to consult: http://www.jnyhrs.com.