• 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 公司新闻
  • 您现在的位置:首页 > 新闻资讯 > 公司新闻 >
  • 无菌室装修在构造上需要注意些什么?
    来源:http://www.jnyhrs.com 浏览: 发布日期:2020-11-18
    1、无尘车间能看做为一个单独的室内空间,想像坐落于外界基本上断绝联络而又并不是完全断绝,不锈钢无菌室,那麼外场的环状过道就变成了无尘车间与外界联络的缓冲地带,可以较大水平的降低外界产生的环境污染。生产车间内窗子相对性于墙壁平齐,絕對不可以设定窗台。
    1. The dust-free workshop can be regarded as a separate indoor space. Imagine that it is located in the outside world, which is basically disconnected but not completely cut off. The stainless steel aseptic room, then the circular corridor of the field will become a buffer zone for the dust-free workshop to contact with the outside world, which can reduce the environmental pollution generated by the outside world to a large extent. The windows in the production workshop are relative to the wall, so the windowsill can not be set.
    2、净化车间的门窗宜用金属材料或金属材料镀塑原材料,不可应用木门窗,以防长期性返潮长菌。
    2. The doors and windows of the purification workshop should be made of metal materials or metal materials coated with plastic raw materials. Wooden doors and windows should not be used to prevent long-term moisture regain and bacteria growth.
    3、外墙壁的窗宜与内墙壁整平,窗台呈菱形或没留窗台,并且是两层窗扇以降低动能损害。
    3. The window on the outer wall should be leveled with the inner wall. The windowsill should be rhombic or without sill, and it should be two-layer sash to reduce kinetic energy damage.
    4、窗扇的叠加层数设定和构造方式要考虑到对气体水份的密封性,使环境污染粒子不容易从外界渗透到。有时室外温度差过大非常容易造成冷凝水,为了防止这样的事情房间内门窗间隙务必要密封性。
    无菌室装修
    4. In order to prevent the environmental pollution particles from penetrating into the environment, it is necessary to consider the sealing property of gas and water in the window sash. Sometimes the outdoor temperature difference is too large, it is very easy to cause condensation water, in order to prevent such things, the gap between doors and windows in the room must be sealed.
    5、门窗原材料应挑选耐候性强,当然形变小,生产制造偏差小,密封性好的,造型设计要简易,不容易积灰,化妆品无菌室,有利于清理,门边框不设门坎。
    5. The raw materials of doors and windows should be selected with strong weather resistance, of course, small deformation, small manufacturing deviation and good sealing. The modeling design should be simple and not easy to accumulate dust. The cosmetics sterile room is conducive to cleaning, and the door frame is not provided with door sill.
    整个无尘车间系统配有一套采用初效、中效、过滤器的三级空气净化系统,控制洁净区内尘粒数等。作为末端过滤装置过滤器决定着整个净化系统的运行效果,无菌室装修,无尘车间装修因此对于过滤器的更换时间是非常重要的。
    The whole dust-free workshop system is equipped with a three-stage air purification system with primary efficiency, medium efficiency and high-efficiency filters to control the number of dust particles in the clean area. As the end of the filter device, high-efficiency filter determines the operation effect of the whole purification system. The decoration of aseptic room and dust-free workshop is very important for the replacement time of high-efficiency filter.
    在无尘车间的装修里,无论是安装在净化空调机组末端的大风量空气过滤器还是安装在送风口的空气过滤器,这些必需要有准确性的运行时间记录和洁净度及风量作为更换依据,如在常态的使用情况下,过滤器的使用寿命可以长达一年以上。
    In the decoration of dust-free workshop, whether it is the high-efficiency air filter installed at the end of the purification air-conditioning unit or the high-efficiency air filter installed at the high-efficiency air supply outlet, these must have accurate operating time records and cleanliness and air volume as the basis for replacement. For example, under normal use, the service life of the high-efficiency filter can be as long as one year.