行业新闻
  • 您现在的位置:首页 > 新闻资讯 > 行业新闻 >
  • 实验室装修功能布局的特点
    来源:http://www.jnyhrs.com 浏览: 发布日期:2021-12-25
    就拿的理化检验科实验室工程来说,它的特性,就应创造一个安全、舒适、美化的实验室工作环境,办公区域与实验区域分开,即形成非受控区域和受控区域。
    Take the laboratory engineering of physical and chemical laboratory department for example. Its characteristics should create a safe, comfortable and beautified laboratory working environment. The office area should be separated from the experimental area, that is, to form an uncontrolled area and a controlled area.
    理化实验室应配置办公室、档案室(报告编制室)、收样及样品储藏室、大型仪器室、小型仪器室、天平室(玻璃量器检定室)、化学实验及样品前处理室、电烤室、洗涤室、实验用水(超纯水)制备室、暗房、试剂储藏室。
    The physical and chemical laboratory shall be equipped with office, archives room (report preparation room), sample receiving and sample storage room, large instrument room, small instrument room, balance room (glass gauge verification room), chemical experiment and sample pretreatment room, electric baking room, washing room, experimental water (ultra pure water) preparation room, dark room and reagent storage room.
    档案室(报告编制室)
    Archives (report preparation room)
    用于报告的编制及打印,科室资料的储藏及查阅。
    It is used for report preparation and printing, Department data storage and reference.
    收样室:
    Sample receiving room:
    独立的样品存储室,存储柜功能区间应划分清楚,标明未检样品、在检样品和已检样品。样品室必须干燥、通风、防尘、防鼠。
    The independent sample storage room and the functional area of the storage cabinet shall be clearly divided, indicating the samples that are not inspected, the samples under inspection and the samples that have been inspected. The sample room must be dry, ventilated, dustproof and rat proof.
    化学实验及样品前处理室
    Chemical experiment and sample pretreatment room
    实验室装修
    实验室必须有排风设施,独立排气柜,有机、无机前处理分开;墙、地板、实验台、试剂柜等要绝缘、耐热、耐酸碱和耐有机溶剂腐蚀;地面应有地漏,防倒流。设置实验台的实验室应设供实验台用的上下水装置、电源插头。
    The laboratory must have exhaust facilities, independent exhaust cabinet and separate organic and inorganic pretreatment; Walls, floors, test benches and reagent cabinets shall be insulated, heat-resistant, acid and alkali resistant and resistant to organic solvent corrosion; There shall be floor drain on the ground to prevent backflow. The laboratory with the test bench shall be equipped with water supply and drainage devices and power plugs for the test bench.
    举例:常规的理化室设计是以岛型设计为主,配有边台、台及试剂架、排毒柜、高柜,台带双层玻璃试剂架,台面安装PP水槽及三口水龙头;此外还配有万向排烟罩;预留空调冰箱位置,实验室整体操作流程通畅、安全、实用、方便。
    For example, the conventional physical and chemical room design is mainly island design, equipped with side platform, platform and reagent rack, detoxification cabinet and high cabinet, with double-layer glass reagent rack, PP sink and three faucets on the table; In addition, it is also equipped with universal smoke exhaust hood; The position of air conditioner and refrigerator is reserved, and the overall operation process of the laboratory is smooth, safe, practical and convenient.
    1. 一般实验室设计以L型或一字型设计为主,配有边台及PP水槽及三口水龙头。实验室整体操作流程通畅、安全、实用、方便。
    1. The general laboratory design is mainly L-shaped or I-shaped, equipped with side platform, PP sink and three faucets. The overall operation process of the laboratory is smooth, safe, practical and convenient.
    2.热工室根据操作要求,采用双U字型设计方案,柜体采用全钢结构,学生性好,可以满足设备放置及使用。
    2. According to the operation requirements, the thermal engineering room adopts the double U-shaped design scheme, and the cabinet adopts all steel structure, which has good student performance and can meet the equipment placement and use.
    3. 一般仪器室设计以U型或L字型设计为主,配套专用仪器边台及写字台,台体设有坐人位,便于仪器操作及数据记录,仪器台离墙或柱500mm为仪器检修通道。
    3. The design of general instrument room is mainly U-shaped or L-shaped, equipped with special instrument side table and writing table. The table body is equipped with a seating position to facilitate instrument operation and data recording. The instrument maintenance channel is 500mm away from the wall or column.
    4.天平室设计采用天平台(钢木结构、18mm大理石台面、具有三级防震功能),天平室还设小边台,供称量前准备用及放置称量物品。
    4. The balance room is designed with a professional platform (steel wood structure, 18mm marble table top, with three-level anti vibration function). The balance room is also equipped with a small side platform for preparation and weighing items before weighing.
    5.UPS室设计有UPS支架,便于UPS放置。
    5. The ups room is designed with UPS support to facilitate the placement of ups.