行业新闻
  • 您现在的位置:首页 > 新闻资讯 > 行业新闻 >
  • 实验室工作台柜暗淡陈腐怎么办?
    来源:http://www.jnyhrs.com 浏览: 发布日期:2021-05-25
    实验室工作台柜暗淡陈腐怎么办?按总结的这篇攻略去做,你或许不会知道本来实验室台柜能够永保风采。
    How to deal with the dull and stale laboratory decoration counter? According to the summary of this strategy to do, you may not know that the original laboratory cabinet can always maintain style.
    1.防尘除尘。春天到了,实验室需求常常开窗通风,但是也会带来尘埃,因而实验室台柜除尘变得很重要。除尘时,尽量用棉布蘸取70%浓度的乙醇溶液对实验室台柜进行擦拭,由于湿棉布能减少冲突,防止划伤家具,同时乙醇还具有灭菌消毒效果,保证家具的洁净卫生。
    1. Dust control. In spring, the laboratory often needs to open windows for ventilation, but it will also bring dust, so the laboratory cabinet dust removal becomes very important. When dedusting, try to use cotton cloth dipped in 70% concentration of ethanol solution to wipe the laboratory cabinet. Because wet cotton cloth can reduce conflicts and prevent scratching furniture, at the same time, ethanol also has the effect of sterilization and disinfection to ensure the cleanliness of furniture.
                                          实验室装修
    2.定时清洁。假如要除去实验室台柜外表残留的化学试剂,建议使用化学药剂进行处理。如碱性试剂的残留污渍,应该使用弱酸性试剂中和后,再用清水洗洁净。需求留意的是,千万不要用带腐蚀性的洗涤剂,不然简单对台面形成腐蚀。
    2. Clean regularly. If you want to remove the chemical reagents remaining on the surface of the laboratory cabinet, it is recommended to use chemicals for treatment. Such as alkaline reagent residue stains, should use weak acid reagent neutralization, and then clean with water. Need to pay attention to is, do not use with corrosive detergent, otherwise simple formation of corrosion on the table.
    3.日常呵护。实验室台柜外表如有污渍,千万不可用力猛擦,可用刷子对污垢部位局部进行轻轻冲洗。平常的实验过程中,不要让坚固的金属制品或其他利器碰撞到实验室台柜,保护其外表不呈现碰撞伤痕。防止在实验台面上做高温实验,避免对家具外表形成损伤。
    3. Daily care. If there is a stain on the surface of the laboratory cabinet, do not wipe it with force. You can use a brush to gently wash the part of the dirt. During the normal experiment, do not let the solid metal products or other sharp tools collide with the laboratory cabinet to protect its appearance from collision scars. Prevent the high temperature experiment on the experimental table to avoid the damage to the appearance of furniture.
    4.定时查看。平常要留意实验室台柜的接缝处是否呈现零部件掉落、脱胶、榫头开裂、榫眼松动等状况。假如螺丝等金属零部件掉落,可将整理洁净的螺丝孔内填充一个细木条,再从头装上螺丝。假如榫头开裂,则需求请实验室装修家具厂家的维修人员处理。
    4. Check regularly. Usually we should pay attention to whether the joints of the laboratory cabinets present the conditions of parts falling, degumming, tenon cracking, tenon loosening, etc. If the screw and other metal parts fall off, you can fill a thin wooden strip in the cleaned screw hole, and then install the screw from the beginning. If tenon cracking, then the need to ask the laboratory decoration furniture manufacturers professional maintenance personnel to deal with.